RSS M-400 Owner'S Manual Download Page 117

Page: 117 / 253

117

Input/output patchbay

The input patchbay library lets you store the current input patchbay
settings for later recall.

The INPUT PATCHBAY LIBRARY popup is used to perform input
patchbay library operations.

fig.ScrInPatLibGuide.eps

Library data list

This lists the library data.

The function buttons perform the following operations.

* Available only for the User library.

Access the PATCHBAY screen.

fig.ScrPatchIn1608.eps

Press [F1 (INPUT)] to access the INPUT tab.

Press [F6 (LIBRARY)] to access the INPUT PATCHBAY
LIBRARY popup.

fig.ScrInPatchLib.eps

For details on library operations, refer to “Library operations”
(p. 51).

Using the input patchbay

library

INPUT PATCHBAY LIBRARY popup

[F1 (PRESET)]

Displays the recall-only PRESET library.

[F2 (USER)]

Displays the USER library, which lets you
recall or store data.

[F4 (RECALL)]

Recalls the library data that is selected in
the list.

[F5 (STORE)]*

Stores settings to the library data that is se-
lected in the list.

[F6 (LOCK)]*

Locks the library data that is selected in the
list.

[F7 (NAME EDIT)]*

Accesses the NAME EDIT popup for edit-
ing the name of the user library data that is
selected in the list.

[F8 (CLOSE)]

Closes the popup.

Accessing the INPUT PATCHBAY

LIBRARY popup

M-400_v15_e.book 117 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands