62
Input channel operations
Input channel operations
details, refer to “Editing the meter settings” (p. 122).
The function buttons have the following operations.
When you press [F8 (Patchbay)] to access the PATCHBAY
screen, the PATCHBAY screen will appear with the currently
selected channel highlighted.
1.
In the fader module section, press [SEL] to select a
channel.
2.
In the CHANNEL EDIT section, press [CH DISP] to access
the CHANNEL DISPLAY screen.
fig.ScrChDisp.eps
Pressing a different [SEL] while the CHANNEL DISPLAY
screen is shown will switch you to the display for that channel.
If you’ve selected the “CHANNEL DISPLAY follows CH
SELECT” button located in the CHANNEL SELECT area of
User Preference (p. 177), pressing a [SEL] will recall the
CHANNEL DISPLAY screen for that channel.
Adjacent odd-numbered and even-numbered channels can be stereo-
linked so that their parameters will have the same settings. This is
convenient when you’re dealing with stereo sources.
1.
Access the CHANNEL DISPLAY screen for the channel that
you want to stereo-link.
fig.ScrChDisp.eps
2.
Press [F1 (LINK)] to turn it on; the channels will be stereo-
linked.
The parameters of the even-numbered channel will be set to the
values of the odd-numbered channel.
The following parameters are linked by stereo-link.
•
Phase
•
Attenuator
•
Filter parameters
•
Gate/expander parameters other than Key In
•
Compressor parameters other than Key In
•
Four-band EQ parameters
•
Fader parameters
•
AUX send level, send switch and send point
•
Direct out point
When you enable stereo-link, the gate/expander and
compressor will operate in stereo.
[F1 (LINK)]
Turns channel link on/off.
[F2 (NAME EDIT)]
Accesses the NAME EDIT pop-
up, where you can specify the
channel name.
[F3 (COPY)]
Accesses the CH COPY popup,
where you can copy channel set-
tings.
[F4 (LIBRARY)
Accesses the CH LIBRARY pop-
up, where you can use the chan-
nel library.
[F5 (GROUP ASSIGN)]
Accesses the GROUP ASSIGN
popup, where you can assign the
channel to DCA groups and
MUTE groups.
[F6 (PEAK CLEAR)]
Clears the level meter’s peak
hold or over indication.
[F8 (Patchbay)]
Accesses the PATCHBAY
screen.
Accessing the CHANNEL DISPLAY
screen
Stereo-linking channels
Stereo-linked parameters
M-400_v15_e.book 62 ページ ２００８年６月２０日 金曜日 午後４時５分
