RSS M-400 Owner'S Manual Download Page 208

Page: 208 / 253

208

Other settings and functions

The Help function explains how to use the M-400.

The Help contents are provided only in English.

Press [HELP].

fig.ScrHelpContGuide.eps

The HELP CONTENTS popup will appear.

CONTENTS list

This lists the Help contents.

In the HELP CONTENTS popup, the function buttons perform the
following operations.

In the CONTENTS list, select the desired content and press
[F1 (OPEN)].

fig.ScrHelp.eps

The HELP popup will appear.

Use the up/down cursor buttons or the value dial to scroll the
display.

Press [F8 (CLOSE)] to close the HELP popup.

By holding down [HELP] and pressing a top panel button, you can
access the Help content related to that button.

You can use the following buttons as Help shortcuts.

• [EFFECTS]

• [METER]

• [SYSTEM]

• [PATCHBAY]

• GROUP section [DCA]

• GROUP section [MUTE]

• [COMP]

• [GATE]

• [EQ]

• [AUX SENDS]

• SCENE section [DISP]

• USER section [DISP]

• RECORDER section [DISP]

• TALKBACK/OSC section [DISP]

• MONITOR section [DISP]

Help function

Using the Help function

[F1 (OPEN)]

Displays the content selected in the list.

[F8 (CLOSE)]

Closes the popup.

Help shortcuts

M-400_v15_e.book 208 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands