159
Scene memory
Scene memory
The SCENE screen is used to edit the scene list and make various
scene settings.
fig.ScrSceneListGuide.eps
1.
Scene list
This is a list of the scenes. The current scene is shown in green.
The list shows the following items.
2.
STATUS EDIT field
Here you can edit the STATUS items of the scene that is selected
in the scene list. The settings in the STATUS EDIT field are
applied when you press the APPLY button.
•
FILT button
Turns the Recall Filter function on/off.
•
Recall parameter select buttons
These buttons select the parameters that will be recalled by the
Recall Filter function.
You can specify the following recall parameters.
•
APPLY button
Applies the settings of the STATUS EDIT field.
In the SCENE screen, the function buttons perform the following
operations.
Operations in the SCENE
screen
SCENE screen
Item
Explanation
NO.
Indicates the scene number.
NAME
Indicates the scene name.
TIME
Indicates the date and time at which the scene was
stored.
STATUS
If the scene Lock or Recall Filter function is on, this
area will indicate LOCK or FILT respectively.
1
2
IN PATCH
Input patchbay settings
PREAMP
Preamp 1 (gain, +48V phantom power,
pad) settings
IN CH
Input channel settings
FX/GEQ/EXT FX
Effect, 31-band GEQ, and external in-
sert settings
AUX/MAIN/MTX
AUX channel, MATRIX channel and
MAIN L/R channel settings
OUT PATCH
Output patchbay settings
TALKBACK/OSC
Talkback/Oscillator settings
DCA/MUTE GROUP
DCA group/Mute group settings
RECORDER
USB memory recorder settings
Button
Function
Reference
page
[F1 (LIST EDIT)]
Accesses the SCENE
LIST EDIT popup,
where you can edit the
scene list.
[F4 (CLEAR)]
Erases the content of the
scene selected in the
scene list, returning it to
a blank scene.
[F6 (GLOBAL SCOPE)]
Accesses the GLOBAL
SCOPE popup.
[F7 (LOCK)]
Locks or unlocks the
scene that’s selected in
the scene list.
[F8 (UNDO RECALL)]
Undoes (cancels) or re-
does the recall opera-
tion you last performed.
M-400_v15_e.book 159 ページ 2008年6月20日 金曜日 午後4時5分