RSS M-400 Owner'S Manual Download Page 163

Page: 163 / 253

163

Scene memory

Global Scope is a function that lets you limit the channels and
parameters that will be recalled; its settings apply to all scenes.

The GLOBAL SCOPE popup is used to make settings for the Global
Scope function.

fig.ScrRecallSafeGuide.eps

fig.ScrRecallSafeGuide2.eps

Parameter recall scope buttons
(CH 1–24, CH 25–48, AUX/MAIN/MATRIX tab)

These buttons specify the scope of the parameters that will be
recalled for the channels selected by the channel recall scope
buttons.

Select the parameters that you want to include in the scope of
recall, and de-select the parameters that you don’t want to be
recalled.

The parameter recall scope buttons correspond to the following
parameters.

For CH1–CH48

For AUX/MAIN/MATRIX

Channel recall scope buttons

These buttons specify the channels that will be included in the
recall scope.

Select the channels that you want to include in the scope of
recall, and de-select the channels that you don’t want to be
recalled.

DCA/MUTE group recall scope buttons

These buttons specify the DCA/MUTE groups that will be
included in the recall scope.

Select the DCA/MUTE groups that you want to include in the
scope of recall, and de-select the DCA/MUTE groups that you
don’t want to be recalled.

OTHER parameter recall scope buttons

Use these to specify other parameters that will be included in
the scope of recall.

Select the parameters that you want to include in the scope of
recall, and de-select the parameters that you don’t want to be
recalled.

In the GLOBAL SCOPE popup, the function buttons perform the
following operations.

The Global Scope function

GLOBAL SCOPE popup

Item

Explanation

Preamp

Preamp gain, pad, and +48V phantom power

Phase

ATT

Attenuator

Filter

Gate

Gate/Expander

Comp

Compressor

Four-band EQ

Sends

AUX sends

Direct

Direct out point

Fader

Faders

Pan

Item

Setting

ATT

Attenuator

Four-band EQ

Sends

AUX/MAIN sends

Fader

Faders

Balance

Limiter

Button

Function

[F1 (CH 1–24)]

Displays CH1–CH24 as the channel recall
scope buttons.

[F2 (CH 25–48)]

Displays CH25–CH48 as the channel recall
scope buttons.

[F3 (AUX/MAIN/
MATRIX)]

Displays AUX1–AUX16, MATRIX1–
MATRIX8 and MAIN L/R as the channel
recall scope buttons.

[F4 (OTHER)]

Displays the DCA/MUTE group recall
scope buttons and the OTHER parameter
recall scope buttons.

[F8 (CLOSE)]

Closes the popup.

M-400_v15_e.book 163 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands