137
Inserting an external effects device
Inserting an external effects device
fig.ExtInsDia.eps
You can use the CONSOLE IN 1–8 and CONSOLE OUT 1–8 jacks located on the M-400’s rear panel to insert up to
eight external effects devices into channels.
The eight external effects devices are shown virtually as an EXT FX1–EXT FX8 rack, allowing you to adjust the
input levels and insert them into channels.
EXT FX1–EXT FX8 use the following input/output jacks.
To insert external effects devices into channels, you’ll use the EXT FX 1–4 tab and EXT FX 5–8 tab of the EFFECTS
screen.
About inserting an external effects device
External effect
Output jack
Input jack
EXT FX1
CONSOLE OUT 1
CONSOLE IN 1
EXT FX2
CONSOLE OUT 2
CONSOLE IN 2
EXT FX3
CONSOLE OUT 3
CONSOLE IN 3
EXT FX4
CONSOLE OUT 4
CONSOLE IN 4
EXT FX5
CONSOLE OUT 5
CONSOLE IN 5
EXT FX6
CONSOLE OUT 6
CONSOLE IN 6
EXT FX7
CONSOLE OUT 7
CONSOLE IN 7
EXT FX8
CONSOLE OUT 8
CONSOLE IN 8
SEND
LEVEL
RETURN
LEVEL
EXT FX 1-8
EXT
INSERT
IN
EXT
INSERT
OUT
To CH 1 EXT FX INSERT IN
To CH 48 EXT FX INSERT IN
CH 1 EXT FX INSERT OUT
CH 48 EXT FX INSERT OUT
CONSOLE INPUT 1-8
CONSOLE OUTPUT 1-8
To AUX 1 EXT FX INSERT IN
To AUX 16 EXT FX INSERT IN
AUX 1 EXT FX INSERT OUT
AUX 16 EXT FX INSERT OUT
To MATRIX 1 EXT FX INSERT IN
To MATRIX 8 EXT FX INSERT IN
MATRIX 1 EXT FX INSERT OUT
MATRIX 8 EXT FX INSERT OUT
To MAIN L EXT FX INSERT IN
To MAIN R EXT FX INSERT IN
MAIN L EXT FX INSERT OUT
MAIN R EXT FX INSERT OUT
SEND
LEVEL
RETURN
LEVEL
M-400_v15_e.book 137 ページ ２００８年６月２０日 金曜日 午後４時５分
