RSS M-400 Owner'S Manual Download Page 113

Page: 113 / 253

113

AUX send/MATRIX send

The MATRIX sends are used to send audio signals from AUX1–AUX16 or MAIN L/R to MATRIX1–MATRIX8.

fig.OutBlkMtxSends.eps

The MATRIX SENDS popup is used to perform AUX send operations.

fig.ScrMatrixSends.eps

•

MATRIX send 1–8

These adjust the sends from AUX1-AUX16 or MAIN L/R to
MATRIX. The MATRIX send area is structured as follows.

fig.PopMtxSendFieldGuide.epsˆ

MATRIX number and name

This indicates the MATRIX channel number and name.

Send level bar

This adjusts the send level to MATRIX in a range of -Inf dB–
+10.0 dB.

The color of the send level bar indicates the send point or the
status of the send switch, as follows.

ON button

This turns the send switch on/off. The send switch turns the
signal to MATRIX on/off.

MATRIX LINK switch

This turns linking of adjacent odd-numbered/even-numbered
MATRIX channels on/off. If this is on, the adjacent MATRIX
channels will be linked.

If MATRIX is stereo-linked, the following parameters will be
shown for the odd-numbered MATRIX send.

fig.PopMtxSendField2Guide.eps

a. MATRIX pan slider

This adjusts the left/right panning of the signal send to the
stereo-linked MATRIX channels in a range of L63–R63.

Send point select buttons

These select the point from which the AUX or MAIN signal is
sent to MATRIX, from the following choices.

MATRIX send operations

4BAND

PRE EQ

PRE FADER

POST FADER

OUTPUT LEVEL

MUTE

FADER

BAL

GEQ

INSERT

LIMITER

PRE EQ

PRE FADER

POST FADER

MATRIX SEND 1-8

TO MTX 1, 3...7

TO MTX 2, 4...8

SW SEND

MTX
LINK

PAN

SW SEND

MATRIX SENDS (AUX 1-16, MAIN L/R)

MATRIX SENDS popup

3 4

Color of the
send level bar

Status

Blue

PRE EQ or PRE FADER send point

Green

POST FADER send point

Gray

Send switch is off

PRE EQ

Send from the pre-EQ point.

PRE FD

Send from the pre-fader point.

POST FD

Send from the post-fader point.

M-400_v15_e.book 113 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands