RSS M-400 Owner'S Manual Download Page 201

Page: 201 / 253

201

Other settings and functions

Access the SYSTEM screen.

fig.ScrSystem.eps

Press [F3 (LOAD/SAVE)].

fig.ScrSysLoadSave.eps

The LOAD/SAVE popup will appear.

Move the cursor to the project file list, and select the project
file that you want to rename.

Press [F3 (NAME EDIT)].

fig.ScrNameEdit.eps

The NAME EDIT popup will appear.

Use the name edit field to edit the name of the project files.
You can specify a name of up to eight characters.

Press [F8 (OK)] to finalize the name you edited and close
the popup.

If you press [F7 (CANCEL)], the name edit will be cancelled and
the popup will close.

For details on name editing, refer to “Editing a name” (p. 50).

Access the SYSTEM screen.

fig.ScrSystem.eps

Press [F3 (LOAD/SAVE)].

fig.ScrSysLoadSave.eps

The LOAD/SAVE popup will appear.

Move the cursor to the project file list, and select the project
file that you want to delete.

Press [F4 (DELETE)].

A message will ask you to confirm the delete file operation.

Press [F8 (PASTE)] to carry out the delete operation.

If you press [F7 (CANCEL)], the operation will be cancelled.

Renaming a project file

Delete a project file

M-400_v15_e.book 201 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands