RSS M-400 Owner'S Manual Download Page 103

Page: 103 / 253

103

Dynamics

You can recall compressor settings from the library, or store the
current compressor settings in the library.

The COMP LIBRARY popup is used to perform compressor library
operations.

COMP LIBRARY popup

fig.PopCompLibGuide.eps

Channel indication

This indicates the channel to which the COMP LIBRARY popup
applies.

Library data list

This is a list of the library data.

In the COMP LIBRARY popup, the function buttons perform
the following operations.

* Available only for the User library.

Accessing the COMP LIBRARY popup

Access the COMPRESSOR popup.

fig.PopComp.eps

Press [F4 (LIBRARY)] to access the COMP LIBRARY popup.

fig.PopCompLib.eps

For details on library operations, refer to “Library operations”
(p. 51).

Using the compressor library

Button

Function

[F1 (PRESET)]

Displays the recall-only PRESET library.

[F2 (USER)]

Displays the USER library, which lets you
recall or store data.

[F3 (PREVIEW)]

Previews (auditions) the library data that
is selected in the list.

[F4 (RECALL)]

Recalls the library data that is selected in
the list.

[F5 (STORE)]*

Stores settings to the library data that is se-
lected in the list.

[F6 (LOCK)]*

Locks the library data that is selected in the
list.

[F7 (NAME EDIT)]*

Accesses the NAME EDIT popup for edit-
ing the name of the user library data that is
selected in the list.

[F8 (CLOSE)]

Closes the popup.

M-400_v15_e.book 103 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands