RSS M-400 Owner'S Manual Download Page 51

Page: 51 / 253

Basic operation

Library operations are performed in the LIBRARY popups.

LIBRARY popups include the following.

Here we’ll explain operations that are common to these LIBRARY
popups.

fig.ScrLibGuide.eps

Applicable channel/effect indication

This shows the channel or effect to which the library operation
will apply.

Library data list

This lists the library data.

The function buttons have the following operations in a
LIBRARY popup.

* Available only for the User library.

Recalling data from a library

Access the LIBRARY popup.

fig.ScrChLib.eps

Make sure that the applicable channel/effect indication
shows the object that you want to recall.

Use [F1 (PRESET)] or [F2 (USER)] to specify whether you
want to recall data from the preset library or user library.

Select the desired library data in the library data list.

Press [F4 (RECALL)].

fig.ScrLibRecallConf.eps

A message will ask you to confirm the library recall operation.

Press [F8 (RECALL)] to execute the library recall operation
and close the popup.

Alternatively, press [F7 (CANCEL)] to cancel the library recall
operation.

If “SCENE/LIB RECALL” in the CONFIRMATION section of
User Preference (p. 177) is not selected, a confirmation message
will not appear in step 4.

Library operations

Type

See page

CH LIBRARY

GATE/EXP LIBRARY

COMP LIBRARY

LIMITER LIBRARY

EQ LIBRARY

FX LIBRARY

GEQ LIBRARY

INPUT PATCHBAY LIBRARY

p. 117

OUTPUT PATCHBAY LIBRARY

p. 119

LIBRARY popup operations

[F1 (PRESET)]

Displays the recall-only PRESET library.

[F2 (USER)]

Displays the USER library in which you
can store data or recall it.

[F4 (RECALL)]

Recalls the selected library data and closes
the popup.

[F5 (STORE)]*

Stores the selected library data and closes
the popup.

[F6 (LOCK)]*

Locks the selected USER library data.

[F7 (NAME EDIT)]*

Accesses a NAME EDIT popup for you to
edit the name of the selected user library
data.

[F8 (CLOSE)]

Closes the popup.

M-400_v15_e.book 51 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands