85
MATRIX channel operations
MATRIX channel operations
MATRIX channels process a mix of the audio signals from AUX1–AUX16 and MAIN L/R, and send them to an output port. You can also select
any two channels from CH1–CH48 and mix them into a MATRIX channel.
fig.MatrixCh.eps
•
ATT (Attenuator)
This adjusts the input level.
•
EXT INSERT (External insert)
These ports let you use the rear panel CONSOLE IN1–IN8 and
CONSOLE OUT1–OUT8 ports to insert external effects
processors.
•
FX INSERT (Effect insert)
These ports let you insert FX1–FX4.
•
FADER
This adjusts the output level.
•
BALANCE
This adjusts the left/right balance for stereo-linked MATRIX.
•
MUTE
This mutes the output of the channel.
•
GEQ INSERT
This port allows you to insert a 31-band GEQ.
About MATRIX channels
MATRIX 1-8
OUT
OUTPUT
PATCHBAY
PRE FADER
POST FADER
OUTPUT LEVEL
FADER
EXT FX
INSERT
ATT
POST ATT
FX
INSERT
GEQ
INSERT
BAL
MUTE
TO MONITOR SELECT
TO REC SELECT
TO SOLO R
SOLO
TO SOLO L
MATRIX 1-8
TO MTX 2, 4...8
TO MTX 1, 3...7
TO MTX 2, 4...8
CH SELECT
FROM CH A
DIRECT OUT 1
DIRECT OUT 48
MATRIX SEND
(FROM AUX 1-16)
TO MTX 1, 3...7
TO MTX 2, 4...8
MATRIX SEND
(FROM MAIN)
TALKBACK
OSCILLATOR
SW SEND
MTX
LINK
PAN
TO MTX 2, 4...8
FROM CH B
Same as the above
M-400_v15_e.book 85 ページ ２００８年６月２０日 金曜日 午後４時５分
