146
Mute groups
Mute groups
The MUTE GROUP ASSIGN popup is used to assign a channel to a
mute group.
You can also use the GROUP ASSIGN popup of the CHANNEL
DISPLAY screen to assign a channel to a mute group. For
details, refer to “Assigning channels to DCA groups and MUTE
groups” (p. 67).
fig.ScrMUTEGroupAssignGuide.eps
1.
Target mute group indication
This indicates the mute group to which the settings in the
MUTE GROUP ASSIGN popup will apply.
2.
Channel select buttons
Here you can select the channels that will be assigned to the
mute group.
In the MUTE GROUP ASSIGN screen, the function buttons perform
the following operations.
1.
In the GROUP section, press [MUTE] to access the MUTE
GROUP screen.
fig.ScrMUTEGroup.eps
2.
Move the cursor to the MUTE group button of the desired
mute group, and press [F8 (ASSIGN)].
fig.ScrMUTEGroupAssign.eps
The MUTE GROUP ASSIGN popup will appear.
1.
Access the MUTE GROUP ASSIGN popup for the desired
mute group.
fig.ScrMUTEGroupAssign.eps
2.
Verify that the target mute group is correct.
3.
Move the cursor to the desired channel select button, and
press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
When the MUTE GROUP ASSIGN popup is displayed, you can
press a top panel [SEL] to turn on/off the corresponding
channel’s assignment to the mute group.
Assigning a channel to a
mute group
MUTE GROUP ASSIGN popup
[F1 (CH 1–24)]
Displays CH1–CH24 as the channel select
buttons.
[F2 (CH 25–48)]
Displays CH25–CH48 as the channel select
buttons.
[F3 (AUX/MAIN/
MATRIX)]
Displays AUX1–AUX16, MATRIX1–
MATRIX8 and MAIN L/R as the channel
select buttons.
[F8 (CLOSE)]
Closes the popup.
1
2
Accessing the MUTE GROUP
ASSIGN popup
Assigning a channel to a mute
group
M-400_v15_e.book 146 ページ ２００８年６月２０日 金曜日 午後４時５分
