133
Effects and 31-band GEQ
Effects and 31-band GEQ
Use the GEQ INSERT SELECT popup to select the destination into
which you want to insert a 31-band GEQ.
fig.ScrGEQInsSelGuide.eps
This popup lets you select the destination into which the 31-band
GEQ will be inserted.
1.
Applicable GEQ indication
This indicates the GEQ to which the GEQ INSERT SELECT
popup applies.
2.
Insert-destination channel select buttons
These buttons select the channel into which the GEQ will be
inserted.
In the GEQ INSERT SELECT popup, the function buttons perform
the following operations.
3.
Current insert destination indication
This indicates the current insert destination.
Accessing the GEQ INSERT SELECT
popup
1.
Access the EFFECTS screen, and press [F2 (GEQ 1–4)] to
display the GEQ 1–4 tab.
fig.ScrGEQRack.eps
2.
Move the cursor to the GEQ INSERT SELECT popup button
for the desired GEQ, and press [ENTER].
fig.ScrGEQInsSel.eps
The GEQ INSERT SELECT popup will appear.
fig.ScrGEQRack.eps
3.
Move the cursor to the LINK button located at the right of
GEQ1 and GEQ2, and press [ENTER] to turn the button on.
4.
Move the cursor to the GEQ INSERT SELECT popup button
for GEQ1, and press [ENTER].
fig.ScrGEQInsSel.eps
The GEQ INSERT SELECT popup will appear.
5.
Move the cursor to the MAIN L insert-destination channel
select button, and press [ENTER] to select it.
6.
Press [F8 (CLOSE)] to close the popup.
7.
In the same way as you did in steps 1 through 5, select
MAIN R as the insert destination for GEQ2.
Inserting a 31-band GEQ
GEQ INSERT SELECT popup
[F6 (SELECT NONE)]
Clears the insert-destination selection.
[F8 (CLOSE)]
Closes the popup.
1
2
3
M-400_v15_e.book 133 ページ ２００８年６月２０日 金曜日 午後４時５分
