ROPA Tiger 6 Original Operating Manual Download Page 172

Page: 172 / 564

Operation

Driving

172 / 564

6.7.2

Selection of the driving direction (/backward)

Foot switch driving direction (

NOT PRESSED

driving direction „forward“

PRESSED

driving direction „backward“

(3)

Foot switch driving direction

(5)

Drive pedal

ADVICE

For driving backward in the operating mode "Road", the drive pedal must be released

completely. Then, wait until the machine comes to a complete standstill (0.0 km/h).

Only then the foot switch "Driving direction" may be pushed and held in this position.

If the lifting unit is still lowered (i.e. the scalper is still on the ground), then an auto-

mated reversing block is in effect. This avoids damage which would otherwise be

caused by driving backward with the lifting unit lowered. The R-Touch displays the icon

To override the back run lock

See Page 183

While driving backward, a warning signal sounds drawing attention of other people to

the reversing movement.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands