manualshive.com logo in svg

ROPA Tiger 6, Original Operating Manual, Page: 421 / 564

Share
Download
ROPA Tiger 6 Original Operating Manual Download Page 421

Maintenance and Service

Defoliator

421 / 564

1

Locking link in storage position

1

2

Locking link left attached

(1)

Locking link left

(2)

Locking hook left on defoliator

Attach left and right locking links to the defoliator locking hook (

2

) as shown.

DANGER

Always attach both locking links (left and right) to ensure that the load can

remain secured in an emergency.

Always ensure that there are no persons in the defoliator pivoting area before unfold-

ing it. Suddenly lowering the defoliator may cause fatal injury if a person is in the dan-

ger zone.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Reviews:

No comments