background image

Operation

Road traffic

184 / 564

The LED in the 

 button lights, the coupling mode   icon appears on the R-Touch.

ATTENTION

Danger of machine damage.

The reversing lock is also switched off with the lifter lowered in "three-point suspension

coupling mode" and in "chain hoist coupling mode".

In "three-point suspension coupling mode" the three-point suspension can be actuated

separately on the right and left with the mini-joystick (

1

).

Lower three-

point sus-

pension

Activate three-

point opera-

tion only left

Activate three-

point opera-

tion only right

Raise three-

point sus-

pension

– Push mini joystick forward, the three-point suspension lowers synchronically.

– Push mini joystick backward, the three-point suspension raises synchronically.

– Push mini joystick shortly left and the three-point operation only left   is activated.

The three-point suspension only lowers and raises on the left.

– Push the mini joystick briefly to the right and the three-point operation is only acti-

vated on the right  . The three-point suspension only lowers and raises on the

right.

– Pressing the multifunctional key (

11

) terminates the three-

point operation left/right, the   icon appears and the three-

point suspension raises and lowers synchronously again.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Reviews: