ROPA Tiger 6 Original Operating Manual Download Page 290

Page: 290 / 564

Operation

Infeed conveyor

290 / 564

6.15

Infeed conveyor

The infeed conveyor passes under the front axle and transports the beet from the lift-

ing unit to the first strainer wheel.
It is driven by an oil motor, directly flanged to the infeed conveyor gear unit.

6.15.1

Setting infeed conveyor rotational speed

Rpm infeed conveyor

Choose this function with R-Select.

Key = infeed conveyor faster

Key = infeed conveyor slower

The transfer pipe affixed to the infeed conveyor, strainer wheel transfer point, is also

driven by the infeed conveyor gear unit and is coupled to the infeed conveyor drive for

rotating speed and direction.

The pressure of the hydraulic drive of the infeed conveyor is constantly displayed and

monitored on the R-Touch in load monitoring (

). When exceeding a warning thresh-

old determined by the driver (adjustable between 50% and 100%), the warning icon

flashes. Simultaneously, a warning tone sounds. For setting the warning threshold

See

Page 138

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands