ROPA Tiger 6 Original Operating Manual Download Page 310

Page: 310 / 564

Operation

Elevator

310 / 564

(1)

Support cylinders

For lifting, the elevator must generally be folded out to the stop. The elevator is then

affixed in the top position by the two support cylinders (

). The two support cylinders

are fed by the elevator drive and always extended to the stop after switching on the

drive.

ATTENTION

Only fold the elevator out/in if there are no longer any beets in the elevator. If the ele-

vator is blocked or if for any other reason there are still beets in the elevator and it

is raised anyway, then this causes severe damage to the elevator rocker arm. Such

damage is assumed as negligently caused and covered neither by warranty nor by

accommodation.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands