Maintenance and Service
CVR gearbox (Traction drive)
404 / 564
Proceed as follows for an oil and filter exchange:
– Clean before oil change wide area around the intake and pressure filters.
– Change oil only with gears warm after operation.
– Put an oil-resistant collecting vessel of sufficient size underneath.
– Unscrew the closing cap at the oil drain valve (
3
).
– Screw on the provided oil drain hose. The valve opens and the old oil drains.
2
4
2
3
8
7
6
5
9
10
– Clean the magnetic screw (
8
) from metal debris. Then, reinsert the screw and
tighten it.
– Remove the screw cap (
5
) of the suction hose from the filter connection. For this
purpose, you need a fork spanner SW 32.
– Loosen the hexagonal bolt connection (
6
) on the filter flange. The bolt connection
must only be loosened. In no case totally screw off this bolt connection. For this
purpose, you need a fork spanner SW 46.
– Screw out the 4 bolts (SW13) on the filter flange (
7
) and pull out the filter insert.
– Exchange the filter element for a new one (ROPA item no. 181060100). For instal-
lation always use a new paper gasket (ROPA item no. 181051700) and a new O-
ring (ROPA item no. 412059500). Before assembly, coat them with some oil.
– Retighten the flange (
7
) and hose line (
6/5
).
– Screw the pressure filter bowl (
9
) with the SW24 spanner out of the gear steering
unit (
10
) and exchange the filter insert for a new one (ROPA item no. 270044200).
– Also exchange the O-ring at the pressure filter bowl (
9
) for a new O-ring.
– At first screw the pressure filter bowl (
9
) completely into the steering unit (
10
), in
order to unscrew it then by
one sixth
revolution.
– Unscrew the oil drain hose again and screw on the screw cap on the oil drain valve
(
3
) again.
– Open the oil filler screw (
4
) and fill in fresh oil into the filler neck for so long, until
the oil level is in the upper range of the inspection glass (
2
).
Prescribed oil variants:
Gear oil ATF
ATF oil as per Dexron II D
Filling volume:
approx. 8.25 litres
Summary of Contents for Tiger 6
