ROPA Tiger 6, Original Operating Manual, Page: 304 / 564

Operation
Strainer wheels (turbines)
304 / 564
The preselected guide grids height can be read in the display area "Cleaning path" ( 1 ),
( 2 ), ( 3 ) or displayed selection field ( 4 ).
1
2
3
ADVICE
Too great distance between the strainer wheels and the guide grids leads to the loss
of small beets.
There are two different possibilities to adjust guide grid height.
Joint adjustment of the guide grids for all 3 strainer wheels.
If there is no strainer wheel separately activated in the selection field ( 4 ) (no 'blue'
field), you can set all the guide grids by pressing the keys + or - one stage by each
pressing higher or lower respectively. If one of the guide grids, in case not all the
guide grids have been set to the same height initially, comes to upper or lower stop,
still the other guide grids are set further to the desired direction. The machine doesn't
"forget" the original height difference, when resetting in the other direction, the height
difference will be restored.
4
Guide grids height