ROPA Tiger 6 Original Operating Manual Download Page 292

Page: 292 / 564

Operation

Infeed conveyor

292 / 564

6.15.2

Infeed conveyor reverse

If the infeed conveyor is blocked by a foreign object, this is shown on the R-Touch with

the warning symbol. A warning tone sounds at the same time. The lifter drive and main

drive then stop automatically.

ATTENTION

Repeated reversing of a blocked infeed conveyor leads to damage to the belt

(sometimes even to the belt being ripped off).

There are no guarantee or warranty claims for such damage!
– In case of blockages, the reversing device may only be used very carefully.

The operating direction of the infeed conveyor may be reversed by pressing the key

(

) "Reverse infeed conveyor" on the keypad III.

This offers a possibility of more easily loosening the dirt, which may collect between

the upper and the lower conveyor in case of very sticky ground, and therefore being

better able to remove it. For this purpose, with lifter raised and conveyor run empty,

press the reversing key (

) several times.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands