ROPA Tiger 6 Original Operating Manual Download Page 427

Page: 427 / 564

Maintenance and Service

Defoliator

427 / 564

7.8.5

Scalper

Scalper flail

Make sure that the scalper flails are always sharpened. If necessary, regrind the

scalper flails on the top side. During regrinding of the flails, make sure of as small

grinding angle as possible (about 12.5°).
A grinding machine is available at ROPA under ROPA item no. 018106700. To achieve

the optimal scalping, we recommend to sharpen the scalper flails with this grinding

machine every 20 - 100 ha of worked area, depending on operating conditions (on 6-

row machine).

CAUTION

Hazard of cut injuries

– Always wear cut-resistant gloves for exchanging the scalper flails to avoid the risk

of cut injuries.

Scalper bearings

The 7 lubricating nipples per scalper bearing must be lubricated after

50 operating hours in each case.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands