ROPA Tiger 6 Original Operating Manual Download Page 293

Page: 293 / 564

Operation

Infeed conveyor

293 / 564

6.15.3

Ground operation infeed conveyor

The infeed conveyor belt can also be run forwards or backwards using the ground

operation.

Ground operation on the left side of the machine

These keys are ONLY active, when no one is sitting in the driver‘s seat. In addition,

the vehicle must be in lifting mode.
It means:

Bunker is swung out.

Operating mode "Field" is switched on.

ADVICE

As soon as a switch ground operation is pressed, the reversing buzzer sounds to warn

bystanders.

When this key is pressed, the infeed conveyor runs and the 1st, 2nd and 3rd strainer

wheels rotate. In addition, the elevator and the auger run for as long as the key is

pressed. If this key is pressed twice in brief succession and then held down, this drive

is reversed.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands