ROPA Tiger 6, Original Operating Manual

Page: 343 / 564

Operation
Central lubricating system
343 / 564
6.23 Central lubricating system
The machine is fitted with a central lubricating system and has three lubricating cir-
cuits.
2
1
3
(1)
Lubricating circuit 1 chassis
(2)
Lubricating circuit 2 lifting beam only eccentric drive
(3)
Lubricating circuit 3 lifter (not eccentric drive) and defoliator
All connected lubricating points are automatically supplied with grease. The lubricating
pump supplies the grease to the main distributors, the main distributors distribute the
grease to sub-distributors, and these supply it to the individual lubricating points. As
long as the lubricating pump is running, a stirring paddle is rotating in the grease reser-
voir and the R-Touch displays the icon . During operation, the lubricating pump in
basic setting is switched on for 21 minutes, then makes a pause for 60 minutes.
If necessary, this setting can be adapted at any time to individual requirements in the
menu "Main settings", submenu "Others", line "Lubricating time (min)".
Interval time windshield-wiper
Drive pedal damping "Road"
Drive pedal damping "Field"
Drive partial shutdown
Other
10
2
2
On
Warning-limit fuel tank (%)
Step additional drive
Greasing time (min)
AdBlue reserve warning %
10
0
21
15
The 2 kg supply reservoir of the grease pump is filled up using the lever on the large
grease bucket. Never completely fill up the 2 kg supply reservoir of the grease pump.
Only fill up the supply reservoir for the grease pump for 90 %. In this way, you avoid
blocking of the ventilation pipe on the 2 kg supply reservoir.