manualshive.com logo in svg

ROPA Tiger 6, Original Operating Manual, Page: 31 / 564

Share
Download
ROPA Tiger 6 Original Operating Manual Download Page 31

Safety

Safety stickers on the machine

31 / 564

355007000 (34)
Shut down the engine before per-

forming maintenance and repair

work and pull out the ignition key.

Read the operating manual and

comply with remarks on safety.

355006800 (39)
Hazard due to electrical current!

Observe a sufficiently safe distance

to high-voltage power lines.

355006900 (41)
Burning hazard due to hot surfaces!

Keep sufficient distance to hot sur-

faces!

355007600 (24)
Only touch machine parts when they

have come to a complete stop.

355007100 (1)
Before starting up, read the operat-

ing manual respectively the main-

tenance manual and observe all

remarks on safety.

355007500 (9)
Chain drive! Body parts or clothing

may be pulled in with the running

drive. Before opening the cover,

stop the machine and secure it

against accidental startup!

355006400 (52)
Hazard due to the machine inadver-

tently rolling away. Secure machine

against inadvertently rolling away

using a wedge before uncoupling or

parking it.

355006600 (21)
Belt drive! Body parts or clothing

may be pulled in with the running

drive. Before opening the cover,

stop the machine and secure it

against accidental startup!

355007300 (50)
Hazard due to machine parts swing-

ing down. Never step into the haz-

ard zone of raised and unsecured

machine parts.

355018600 (20)
Never reach into the crushing dan-

ger area as long as the parts there

are still moving.

355006300 (33)
Hazard from parts being flung away

with the engine running. Keep a suf-

ficient safety distance!

355008100 (40)
Hazard of discharge of liquids under

high pressure. Before performing

maintenance and repair work, read

the operating manual and comply

with remarks on safety.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Reviews:

No comments