ROPA Tiger 6 Original Operating Manual Download Page 70

Page: 70 / 564

Operating Components

Driver’s seat

70 / 564

Backrest adjustment

CAUTION

Take care with the backrest frame – it may jerk forward and cause injury!
– Hold the backrest hand tight before adjusting.

The backrest is adjusted using the locking

lever (arrow).
The locking lever must latch into the

desired position. It should not be possible

to move the backrest into another position

when it is locked.

Horizontal suspension

Under certain driving conditions, it is use-

ful to activate the horizontal suspension.

This means that shock impacting in the

driving direction can be better absorbed

by the driver seat.
Position 1 = horizontal suspension on
Position 2 = horizontal suspension off

Shock absorption

The damping of the seat can be adjusted

to suit the characteristics of the road or

field surface. The comfort of the suspen-

sion can be adjusted for the individual.
Rotate the lever to the desired setting and

release.
Position 1 = soft
Position 2 = medium
Position 3 = hard
The manufacturer recommends position 2

as the basic setting for drivers of average

weight.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands