ROPA Tiger 6 Original Operating Manual Download Page 240

Page: 240 / 564

Operation

Defoliator

240 / 564

6.13.8

Leaf-spreader

6.13.8.1

Fold leaf-spreader

Leaf-spreader

Choose this function with R-Select.

Key = swing down in operating posi-

tion
- Key = swing up in transport position

WARNING

Injury hazard when swinging the leaf-spreader up or down. Injury hazard from

foreign objects flung away!

Due to the high speed of the leaf-spreader, foreign objects getting onto it are flung

away with great power.
– When swinging the leaf-spreader, always make sure that no people are located in

the swinging range of the leaf-spreader.

– Always keep the prescribed safety distance (radius 30 m) to the leaf-spreader.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands