ROPA Tiger 6 Original Operating Manual Download Page 204

Page: 204 / 564

Operation

Steering

204 / 564

6.10.2.4

Activating offset-steer

The preselected offset-steer is activated by briefly pressing the key (

) on the joystick.

Conditions for it:

Operating mode "Field" switched on and unload conveyor in lifting position.

Main steering switch unlocked.

The speed of the machine is at least 0.5 km/h.

Only after activation the articulation joint moves into the preselected position. Simulta-

neously, the rear axle is switched to potentiometer steering and automatically moves

to the position currently set by the hand potentiometer (

). When offset-steer is acti-

vated, the machine reacts to any change of the offset-steer stage.

Indication on the R-Touch:

Offset-steer 2 right active (

)

and rear axles in potentiometer steering mode (

)

Indication hand potentiometer setting (

)

ADVICE

As soon as stage 1 or 2 of offset-steer is activated, the safety guard is automatically

swung out.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands