manualshive.com logo in svg

Rohde & Schwarz Scope Rider RTH1002, User Manual

The Rohde & Schwarz Scope Rider RTH1002 is a portable oscilloscope with built-in multimeter functionality. Get the most out of your device by downloading the User Manual for free from manualshive.com. This manual will guide you through all the features and functions, ensuring you make the most of your instrument.

Share
Download
background image

Spectrum Analysis

R&S

®

Scope Rider RTH

139

User Manual 1326.1578.02 ─ 12

If the specified frequency 

±

10

 

% is not detected in the signal, the measurement is inva-

lid. An "F" is displayed as an error indicator.

Remote command: 

HARMonic:FUNDamental:TYPE

 

on page 368

HARMonic:FUNDamental:USER

 

on page 369

HARMonic:RESult<m>:FRQMissing?

 

on page 372

Limits, Loaded File

Defines for which harmonics a limit check is to be performed. If a limit check is activa-
ted and the specified limit is exceeded for a harmonic, the background of the harmonic
is highlighted red in the graphic. In addition, an "L" is displayed as an error indicator.
"Limit!" is indicated during the acquisition in which the violation occurs.

If the number of harmonics to be analyzed is restricted by a standard or a user-defined
file, only the results for those harmonics can be displayed or exported (see also 

"Dis-

play Harmonics, Max No Harmonics"

 

on page 140).

"None"

No limit check is performed. All 64 harmonics can be displayed and
exported.

"EN50160"

Limits are checked according to the predefined values in the
EN50160 standard. Only specific harmonics are selected for analysis.

"User"

Limits are checked according to the values in a user-defined file. For
details on the required file format, see 

Chapter 6.3.6.1, "Limit File

Format"

, 

on page 141.

If a user-defined limit file is loaded for harmonics measurement, only
the results for the specified harmonics are calculated, displayed, and
exported. A limit check is performed only for those harmonics for
which a limit value is defined.
If "User" is selected, the "Loaded File" field indicates the currently loa-
ded file.
Select the file that contains the user-defined limits using the 

Open

function.

Remote command: 

HARMonic:LIMits:TYPE

 

on page 370

Open

Opens a user-defined file that contains the selection of harmonics and, optionally, the
limits for individual harmonics.

The "Loaded File" field indicates the currently loaded file.

Note that this setting is only available if 

Limits

 is set to "User".

Remote command: 

HARMonic:LIMits:NAME

 

on page 369

HARMonic:LIMits:LOAD

 

on page 369

HARMonic:RESult<m>:NOHarmonics?

 

on page 377

HARMonic:FUNDamental:CURRent?

 

on page 369

Harmonics Measurement (Option R&S

 

RTH-K34)

Summary of Contents for Scope Rider RTH1002



















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Scope Rider RTH1002

Makerfire N10 Instructions Manual preview
N10
Brand: Makerfire Pages: 10
Eagle T1 Product Manual preview
T1
Brand: Eagle Pages: 3
lancer 9000 series Installation Manual preview
9000 series
Brand: lancer Pages: 12
DanMedical D-MAS HyperSat 2540 Instructions For Use Manual preview
D-MAS HyperSat 2540
Brand: DanMedical Pages: 103
Warehouse-lighting LTR Series Installation Instructions preview
LTR Series
Brand: Warehouse-lighting Pages: 3
Eagle Group SHT Series Operation Manual preview
SHT Series
Brand: Eagle Group Pages: 8
E2S A112N Installation Instructions preview
A112N
Brand: E2S Pages: 5
Gardol GLVE 1400-34 Original Operating Instructions preview
GLVE 1400-34
Brand: Gardol Pages: 260
York Fitness 60091 Owner'S Manual preview
60091
Brand: York Fitness Pages: 20
Hammer Strength MTSP Unpacking And Assembly Instructions preview
MTSP
Brand: Hammer Strength Pages: 18
IDEAL 61-521 Instruction Manual preview
61-521
Brand: IDEAL Pages: 12
Pari Trio Instructions For Use Manual preview
Trio
Brand: Pari Pages: 12
laerdal SimPad PLUS Wi-Fi Setup preview
SimPad PLUS
Brand: laerdal Pages: 2
laerdal SimPad PLUS Important Product Information preview
SimPad PLUS
Brand: laerdal Pages: 104
laerdal SimPad User Manual preview
SimPad
Brand: laerdal Pages: 33
laguna POWER CLEAN Operation And Maintenance Manual preview
POWER CLEAN
Brand: laguna Pages: 16
Lafayette LL-15 User Manual preview
LL-15
Brand: Lafayette Pages: 2
ABB RELION Series Product Manual preview
RELION Series
Brand: ABB Pages: 33

Brands by name

Popular brands

Load more brands