GX-6000 Operator’s Manual
Chapter 3: Operation • 59
3 . When the desired user ID is displayed, press and release the POWER/ENTER
button.
NOTE:
To exit the selection screen without saving a change, press and release the
DISP/LOCK button. You will return to the Select User ID screen without
saving the user ID change.
4 . The unit will save the selected user ID as the current one and will return you to the
Select User ID Screen.
Select Station ID Screen
This screen only appears in Display Mode if the
ID DISPLAY
item in Maintenance Mode
is set to
ON
. Use this screen to select a station ID from the station ID list in the GX-6000’s
memory. The current station ID is displayed. A station ID can be up to 16 characters long.
The GX-6000 can store up to 128 station IDs.
The station ID provides a way to identify a location where monitoring was done during a
data logging session. If the station ID is changed during an operating session, a new data
session is initiated with the new station ID attached to it. This allows you to change the
station ID during operation and have each station ID that was used during an operating
session saved for the corresponding data. See the GX-6000 Data Logger Management
Program Operator’s Manual for a detailed description of data logging and the station ID.
The station ID list cannot be edited using the GX-6000 user interface. The GX-6000
Maintenance Data Loader Program is required to define or change station IDs in the
station ID list. For a detailed description of editing the list of station IDs stored in the
GX-6000, see the GX-6000 Maintenance Data Loader Program Operator’s Manual.
DISP
STATION ID
TANK 5
