background image

Metal Detector

WINBEST® by BARSKA®, as manufacturer, warrants this new product to be free of 

original defects in materials and/or workmanship for the length of time specified by this 

warranty. This warranty does not include damage caused by abuse, improper handling, 

installation, maintenance, normal wear-and-tear, unauthorized repairs or modifications 

and tampering in anyway.

This warranty is limited to the original purchaser and is not transferable. This warranty 

applies only to products purchased in the United States of America.

In the event of a defect within 30 days, the consumer must return the defective unit to the 

WINBEST® by BARSKA® dealer (the place of purchase) at his/her own expense.

Beyond 30 days, WINBEST® by BARSKA® products should be sent to the following 

address for warranty repairs. Products must be packed carefully and sturdily to prevent 

damage in transit, and returned freight prepaid to:

WINBEST® by BARSKA®

855 Towne Center Drive

Pomona, CA 91767

For additional and updated information

please visit www.barska.com

Please email [email protected] or call 1.888.666.6769 for Return Merchandise Number 

(RMA#) before any returns.

NOTE: All merchandise received without a valid RMA# will be returned to shipper at his/

her own expense.

Please include all of the following when returning WINBEST® by BARSKA® products for 

service and/or replacement:

1. Please write your complete details (Name, Address, Telephone #, E-mail address,

    RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect

4. A Check/Money Order of $25.00 to cover inspection, shipping and handling

*Please allow 6-8 weeks for delivery

This product will either be replaced or repaired at the discretion of the warrantor. If it’s 

a discontinued item, we will replace the product with an equivalent product. Should the 

repair not be covered by this warranty, an estimate will be sent for your approval. Non-

warranty repairs or refurbishing are always provided at a reasonable cost.

WINBEST® by BARSKA® shall not be liable for any consequential, incidental and/or 

contingent damages whatsoever. We will not pay shipping, insurance or transportation 

charges from you to us, or any import fees, duties and or taxes. This warranty supersedes 

all previous Winbest® by BARSKA warranties.

©2018 BARSKA®

BC317

1 YEAR LIMITED WARRANTY

1/18

Pro-400 Metal Detector

©2018 BARSKA®

855 Towne Center Drive | Pomona, CA 91767

(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com

BC565

1/18

Summary of Contents for WINBEST Pro-400







Reviews: