Riso V8000 Series, Technical Manual

Page: 317 / 362

[17 - 18]
CHAPTER 17. TEST MODE
PAPER FEED/EJECT TEST MODE
No.
Description
Setting
Range:
Units:
Default:
-100 to +100 (-10.0 mm to +10.0 mm)
* (+ moves inside)
5 (0.5 mm)
0 mm
Description Adjusts the rear pinch roller position.
Setting
Range:
Units:
Default:
-100 to +100 (-10.0 mm to +10.0 mm)
* (+ moves inside)
5 (0.5 mm)
0 mm
Description
Setting
Range:
Units:
Default:
0 to 340 (0 mm to 340 mm)
1 (1 mm)
0 mm
* When 0 is entered, the pinch width is varied by the paper width potentiometer.
* Values below 55 are treated as 0. (The pinch width is varied by the paper width
potentiometer.)
Description
Setting
Range:
Units:
Default:
-200 to +200 (-20.0° to +20.0°)
1 (0.1°)
0°
Description
Setting
Range:
Units:
Default:
0 to 2000
1
1251
Description
Setting
Range:
Units:
Default:
0 to 2000
1
1013
Description
Setting
Range:
Units:
Default:
0 to 2000
1
1100
Description
Setting
Range:
Units:
Default:
0 to 2000
1
977
Paper Feed Adjustment Angle
Specifies the paper feed stop angle for Test mode No. 464 (second paper feed amount
adjustment).
Paper Ejection Roller Speed Adjustment 1
490 Rear Pinch Roller Position Adjustment
Pinch Roller Movement Width Setting
Sets the pinch roller movement width.
494
495
496
491
492
493
Data settings
Front Pinch Roller Position Adjustment
Adjusts the front pinch roller position.
489
Adjusts the paper ejection roller speed when the main motor speed is 60 rpm (speed key
1 during printing).
Paper Ejection Roller Speed Adjustment 4
Adjusts the paper ejection roller speed when the main motor speed is 80 rpm (speed key
2 during printing).
Adjusts the paper ejection roller speed when the main motor speed is less than 35 rpm
(inner pressure roller resetting and test mode low-speed printing).
Paper Ejection Roller Speed Adjustment 2
Adjusts the paper ejection roller speed when the main motor speed is 50 rpm (proof
print).
Paper Ejection Roller Speed Adjustment 3