Riso V8000 Series, Technical Manual

Page: 293 / 362

[16 - 30]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type D25 [2nd print drum status error]
Panel display
D25-***
!! Print Drum 2 is Not in Correct Pos ition !!
Check the Position of Print Drum 2
Res et method
Pull out 2nd print drum. (2nd print drum set sens or OFF; 2nd print drum connection s ignal
OFF)
Error point Error conditions
586 The inserted print drum was unlocked during idling.
587 Print drum inserted with position B lock released.(Drum lock position sensor was OFF)
615 Horizontal centering sensor dose not go ON within 10s when connecting the drive.
Error type D26 [1st print drum not s et]
Panel display
D26-***
Set Print Drum 1 in Place
Res et method
1s t print drum detection. (1s t print drum set s ens or, 1st print drum connection signal, and
1s t print drum lock pos ition sensor all ON)
Error point Error conditions
573 The print drum s pecified by the print m enu is not set.
Error type D27 [2nd print drum not s et]
Panel display
D27-***
Set Print Drum 2 in Place
Res et method
2nd print drum set sensor detects 2nd print drum . (2nd print drum set s ens or, 2nd print
drum connection signal, and 1s t print drum lock pos ition sensor all ON)
Error point Error conditions
573 The print drum s pecified by the print m enu is not set.
Error type D28 [D to P 1s t print drum not set]
Panel display
D28-***
Set Print Drum 1 in Place
Res et method
After the 1st print drum is detected, press the “Cancel” button to s witch to the Job delete
screen.
Error point Error conditions
573 The print drum s pecified by the D to P is not set.
Error type D29 [D to P 2nd print drum not set]
Panel display
D29-***
Set Print Drum 2 in Place
Res et method
After the 2nd print drum is detected, press the “Cancel” button to switch to the Job delete
screen.
Error point Error conditions
573 The print drum s pecified by the D to P is not set.
Error type D30 [Paper feed tray not set]
Panel display
D30-***
Set Standard Feed Tray in Place
Res et method Switch the paper feed tray set sensor ON. (Set)
Error point Error conditions
489 Paper feed tray s et sensor was OFF.