Riso V8000 Series, Technical Manual

Page: 305 / 362

[17 - 6]
CHAPTER 17. TEST MODE
SYSTEM/CNTRL PANEL TEST MODE
AF No. 1/2 Switch
Description
Setting
Description
Setting
O
Description
Setting
Description
Setting
Range:
Default:
Description
Setting
Range:
Default:
Description
Setting
Range:
Default:
Description
Setting
Range:
Default:
Description
Setting
Range:
Default:
Description
Range:
Default:
Description
Setting
Range:
Default:
099 Warning errors display
Display or not display the following warning errors. (F02, F10, F43)
0 (not display)
1 (display)
1 (display)
095 Counter Action Control
Enables/Disables copy counters (solenoid counter, software counter). Setting
returns to default value when power is switched off.
0 (Disabled) ¬ Does not increment
1 (Enabled) ¬ Increments
1 (Enabled)
091 Printing Position Adjust Control
Enables/Disables the printing position adjustment when printing is running.
0 (Disabled)
1 (Enabled)
1 (Enabled)
090 Print Quantity Display Recovery
Setting of print quantity display after previous printing finish, display [0] or
[previous print quantity].
0 (Recovery)
1 (Not recovery)
1 (Not recovery)
Counter Action Control 2
Enables/Disables counters (solenoid counter, software counter). This setting
is stored even when power is switched off.
Data settings
None
Maintenance-Copy Count Clear
Clears the maintenance print count to display the maintenance call message.
Maintenance-Drum Meter Clear
Constant Print Position Recovery
The printing position goes center before master making.
In the case of renew pages only/all times of master making; the printing
position goes back to the previous position after master making.
Clears the maintenance print-drum print count to display the maintenance call
message.
087
088
089
None
None
Maintenance-Master Count Clear
Clears the maintenance master count to display the maintenance call
message.
Min. Print Quantity Control
Enables/Disables the minimum print number option in the administrator
settings.
* Cannot be selected from menu screen of the test mode.
* Can be set if No. 960 has been previously entered.
* Enter the number and press the “Start” key to select 0/1.
098
Setting
0 (Disabled)
1 (Enabled)
1 (Enabled)
0 (renew pages only)
1 (all times)
0 (renew pages only)
0 (Disabled) ¬ Does not increment
1 (Enabled) ¬ Increments
1 (Enabled)
094
097