Riso V8000 Series, Technical Manual

Page: 295 / 362

[16 - 32]
CHAPTER 16. PANEL MESSAGES
Warnings (Miscellaneous)
DETAILED LIST OF PANEL MESSAGES
Error type F01 [No m aster on 1st print drum ]
Panel display
No Master on Print Drum
Make a New Master
Res et method Switch to master m aking mode to clear.
Error point Error conditions
050 No mas ter on the print drum at the start of printing
Error type F02 [Master image larger than paper size]
Panel display
Page Form at is Larger than Paper Size
!! Pos sible Ink Sm udges on Prints !!
(Continue->START Key)
Res et method Press the Start key to s tart. (Print mode).
Error point Error conditions
053 The paper s ize did not m atch the size of the m aster on the print drum at the s tart of printing.
Error type F03 [Multi up: paper s ize error]
Panel display
Multi-Up on Irregular-Size Paper?
!! Pos sible Im age Cutting !!
Continue->START Key / Cancel->STOP Key
Res et method Continue printing with standard paper.
Error point Error conditions
056 Tried to us e m ulti up m ode on non-s tandard paper.
Error type F04 [Original not s et]
Panel display
Place Another Original and Press Start Key
To Cancel, Press Stop Key
Res et method Press the Start key to clear.
Error point Error conditions
059
Error type F05 [Print quantity under “minimum print quantity”]
Panel display
Enter Print Quantity Over [nn],
Program med Minim um Value
Res et method Set the print quantity over the minim um print quantity setting.
Error point Error conditions
062 Print quantity was not s et above the minimum print quantity setting in m as ter making m ode.
Error type F06 [P to P 1st print drum removal request]
Panel display Press Print Drum 1 Release Key and Pull Out Print Drum 1
Res et method
Pull out 1st print drum using the 1st print drum removal key.
Press the Cancel button to switch to the print menu.
Error point Error conditions
585 The user must rem ove 1st print drum .
Error type F10 [Master image larger than paper size: 2]
Panel display
Page Form at is Larger than Paper Size
!! Pos sible Ink Sm udges on Prints !!
(Continue->TEST Key)
Res et method Press the stop, res et, or tes t keys .
Error point Error conditions
068 Paper size did not m atch the s ize of the mas ter on the print drum at the start of tes t printing.