Riso V8000 Series, Technical Manual

Page: 272 / 362

[16 - 9]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type T14 [Flat bed error]
Res et method Switch on power once again.
Error point Error conditions
101 HP s ens or does not go ON.
102 HP s ens or does not s witch OFF.
103 Com munication error
104 Incorrect s etting data
105 Com unication error (Tim e out)
127 Com unication error (Sequence error)
128 Scanner com munication tim e out 1
129 Scanner com munication tim e out 2
160 Scanner com munication tim e out 3
161 Scanner com munication tim e out 4
162 Scanner com munication tim e out 5
163 Scanner com munication tim e out 6
164 Scanner com munication tim e out 7
165 Scanner com munication tim e out 8
166 Scanner com munication tim e out 9
167 Scanner com munication tim e out 10
168 Scanner com munication tim e out 11
Error type T15 [AF error]
Res et method Jam reset
Error point Error conditions
706 AF read puls e m otor lock
707 EEPROM error
708 Original IN Sensor Sens itivity Adj. error
709 Com munication error with shading IC
710 AF-VR error
711 ROM-Ver of AF is not inform ed.
712 Signal of “AF_SIG_TIMING” from AF is not detected.
Error type T16 [1st inner pres sure error]
Res et method
Press the [OK] key or the Reset button
→
recovery operation (inner pressure roller HP
res etting).
Error point Error conditions
519
Inner pressure detection sensor does not switch OFF during inner pressure roller raise
operation, even when retried.
520
Inner pressure detection sensor does not go ON during the inner press ure roller lower
operation, even when retried.
521
Inner pressure detection sensor does not go ON during the idling (when power is s witched
on).
Panel dis play
T16-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Panel dis play
T14-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Panel dis play
T15-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service