Riso V8000 Series, Technical Manual

Page: 269 / 362

[16 - 6]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type T02 [Elevator motor lock]
Res et method Press the [OK] key or the Reset button, or switch on power once again.
Error point Error conditions
401 Lower limit s ens or does not switch OFF within 2 s when rising.
402 Upper limit s ens or does not go ON within 12 s when rising.
403 Upper limit s ens or does not switch OFF within 2 s when lowering.
404 Lower limit s ens or does not go ON within 12 s when lowering.
405 Upper limit s ens or is continuously ON for at least 2 s during the elevator servo operation.
406 Both upper and lower limit sensors were ON.
407 Overload current detection
Error type T03 [1st clam p s lide m otor lock]
Panel display
T03-***
!!System Error!!
Call Service
Res et method To be reset by Technician only
Error point Error conditions
508
Clamp slide HP sensor does not s witch from OFF
→
ON and the slide return sensor does
not s witch OFF within 2 s when pos itioning the clam p at the hom e pos ition.
509
Clamp slide HP sensor does not s witch from ON
→
OFF within 1 s when pos itioning the
clam p at the hom e pos ition.
510
Clamp slide HP sensor does not s witch from OFF
→
ON and the slide return sensor does
not go ON within 2 s when resetting the clam p.
511
Clamp slide HP sensor does not s witch from ON
→
OFF within 1 s when resetting the
clam p.
512 Overload current detection (It is not monitored between 100m s after m otor ON)
513
The m as ter-m aking unit is in the incorrect position when starting pos itioning the clam p unit
at the forth position.
562
The m achine type comm unication error is occurred when positioning the clamp unit at the
forth position.
563
The m achine type comm unication error is occurred when positioning the clamp unit at the
back position.
Error type T04 [1st ink overflow]
Panel display
T04-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Res et method Press the [OK] key or the Res et button, and switch off the overflow s ens or.
Error point Error conditions
516 Overflow conditions were reached.
Panel display
T02-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service