Riso V8000 Series, Technical Manual

Page: 276 / 362

[16 - 13]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type T29 [2nd ink overflow]
Res et method Press the [OK] key or the Reset button and switch off the overflow s ensor.
Error point Error conditions
516 Overflow conditions were reached.
Error type T30 [2nd print pos itioning pulse motor lock]
Panel dis play
T30-***
!!System Error!!
Call Service
Res et method To be res et by Technician only
Error point Error conditions
601
The vertical centering sens or does not go ON within 3 s during fine adjus tm ent of the vertical
home position from the top.
602
The vertical centering sens or does not s witch OFF within 12 s during rough adjustment of
the vertical hom e pos ition from the top.
603
The vertical centering sens or does not go ON within 12 s when positioning at the home
position from the bottom .
605 Pos ition T and pos ition A correction does not finis h.
Error type T31 [2nd horizontal pulse motor lock]
Panel dis play
T31-***
!!System Error!!
Call Service
Res et method To be res et by Ris ograph Technician only
Error point Error conditions
611 Horizontal centering sensor does not go ON within 3.5s during horizontal centering.
612 Horizontal centering sensor does not switch OFF within 2s when releasing the drive.
613 Drive releas e s ens or does not go ON within 3.5s when releasing the drive.
614 Drive releas e s ens or does not s witch OFF within 5s when connecting the drive.
623
Horizontal centering sensor is ON during horizontal movement, even when m ore than 2 mm
from the sensor.
Error type T32 [2nd press ure control m otor lock]
Panel dis play
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Res et method Press the [OK] key or the Reset button, or switch on power once again.
Error point Error conditions
621
Pressure HP sensor does not go ON during pressure initialization within the preset interval.
(to identify a defect in the sensor itself)
622
Pressure HP sensor does not switch OFF within the pres et interval when the motor rotates
with the HP s ens or ON.
624
Print pres sure limit sensor does not change when the m otor starts (initial status ) during the
print pres sure limit count within the pres et interval. (for motor lock detection)
625
Print pres sure limit sensor does not change during the print pressure limit count (after
leaving initial status ) within the preset interval. (for motor lock detection)
Panel dis play
T29-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service