Riso V8000 Series, Technical Manual

Page: 29 / 362

[1 - 18]
CHAPTER 1. MAINTENANCE
(10) If the difference is more than 0.5 mm between the front and rear, attach two Height adjusters under
the front of the machine, firmly against the bracket of the two casters on the machine. The Height
adjusters need not be placed on the rear of the machine.
(11) Rotate either one of both of the Height adjusters to raise the machine until the rear and front of the
machine is leveled (the difference in the scale reading is within 0.5 mm between the front and rear).
The Height adjuster is raised or lowered by turning the bottom nut.
(12) After adjusting the levelness, lock the position by turning and bringing the center nut tightly against
the top nut.
S0113
S0114
Locking the Height adjuster:
Rotate the center nut tight against the top nut.
Height adjuster
Caster
< Height adjuster >
Height adjuster
Caster
Height adjustment:
Rotate the bottom nut for height adjustment.