[16 - 7]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type
T05 [1st print pos itioning pulse motor lock]
Panel dis play
T05-***
!!System Error!!
Call Service
Res et method
To be res et by Technician only
Error point
Error conditions
601
The vertical centering sens or does not go ON within 3 s during fine adjus tm ent of the vertical
home position from the top.
602
The vertical centering sens or does not s witch OFF within 12 s during rough adjustment of
the vertical hom e pos ition from the top.
603
The vertical centering sens or does not go ON within 12 s when positioning at the home
position from the bottom .
605
Pos ition T and pos ition A correction does not finis h.
Error type
T06 [1st horizontal pulse motor lock]
Panel dis play
T06-***
!!System Error!!
Call Service
Res et method
To be res et by Technician only
Error point
Error conditions
611
Horizontal centering sensor does not go ON within 3.5s during horizontal centering.
612
Horizontal centering sensor does not switch OFF within 2s when releasing the drive.
613
Drive transm it release sensor does not go ON within 3.5s when releasing the drive.
614
Drive releas e s ens or does not s witch OFF within 5s when connecting the drive.
623
Horizontal centering sensor is ON during horizontal movement, even when m ore than 2 mm
from the sensor.
Error type
T07 [Digitizer error]
Res et method
Switch on power once again.
Error point
Error conditions
701
Com munication error with digitizer.
Error type
T08 [Com puter interface error]
Res et method
Switch on power once again.
Error point
Error conditions
001
Com munication error with computer interface.
Panel dis play
T07-***
!!System Error!!
Turn Main Power SW OFF Then ON
If Recovery has Failed, Call Service
Panel dis play
T08-***
!!System Error!!
Turn Main Power SW OFF Then ON
If Recovery has Failed, Call Service
Summary of Contents for V8000 Series
