Riso V8000 Series, Technical Manual

Page: 306 / 362

[17 - 7]
CHAPTER 17. TEST MODE
4. Process/Scanning Test Mode
PROCESS/SCANNING TEST MODE
No.
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Data settings
Adjusts the original scanning start position on the flat bed.
FB Scanning Speed Adjustment
Adjusts the original scanning speed on the flat bed.
FB Horizontal Scan Position Adjust
Adjusts the original horizontal scan position on the flat bed.
FB Scan Start Position Adjust
-30 to +30 (-3.0 mm to +3.0 mm) relative to datum
* (+ is to rear)
5 (0.5 mm)
0 mm
-60 to +60 (-6.0 mm to +6.0 mm) relative to datum
* (+ is downward)
1 (0.1 mm)
0 mm
180
181
182
183
-100 to +100 (-10.0% to +10.0%) relative to datum
* (+ shrinks)
1 (0.1%)
0%
-16 to +16
1
2
Line-copy Slice Level Adjustment
Sets the slice level for text mode. Larger values for lighter print.
No. Sensors, switches Detection status
100 Image Scanner AF Shading Sensor Carriage at home position
101 Flat Bed Original Det. Sensor Open (original present)
110 Stage Cover Sensor Original cover is open
No. Motors, solenoids Remarks
130 Image Scanner Lamps ON Original scanning light source
131 FB Backlight Original alignment light source
No.
150
151
152
153
154
155
No. Data check Display details
Moves the scanner to the lock position for transporting.
* Set the machine to display the error T23.
Scanner Cycle Action
Scanner AF Action
Unit check
Shading Operation
Scanner Home Action
Cancels the error status set in Test mode No. 154.
Scanner Lock Action
Scanner Release Action
Runs the shading operation.
Returns the scanner to the home position.
Performs one scanner operation cycle. (A3 scanning)
* Adjusts the speed according to the reproduction size in Test mode No. 187.
Moves the scanner to the AF scanning position.