Riso V8000 Series, Technical Manual

Page: 326 / 362

[17 - 27]
CHAPTER 17. TEST MODE
10. Accessories 1 Test Mode
ACCESSORIES 1 TEST MODE
No. Sensors, switches Detection status
700 Original Registration Sensor Blocked (original present)
701 Original IN Sensor Blocked (original present)
702 Original OUT Sensor Blocked (original present)
703 AF Original Detection Sensor Original present
707 AF Unit Cover SW Stage cover (AF) is set
708 AF Unit Joint Signal Check AF is connected
709 ST Tape Jam Sensor Blocked (tape present)
710 ST Tape Detection Sensor Blocked (tape present)
711 ST Power Switch Power ON
No. Motors, solenoids Remarks
730 ADF Read Pulse Motor
No.
750
751
752
755
756
757
758
759
Checks the data in the storage memory.
* Only one storage memory card to be checked should be inserted into the slot.
* Two memory cards cannot be checked simultaneously.
ST Tape Output
== Spare (function not available) ==
Unit check
AF Cycle Action
AF Feed Action
Storage Memory Check
Erases data and initializes storage memory.
* Only one storage memory card should be inserted into the slot for initialization.
* Two memory cards cannot be initialized simultaneously.
Digitizer Initialization
Storage Memory Initialization
Resets the digitizer internal data to the default values.
* Test mode No. 787 also resets to defaults.
Orig. IN Sensor Sensitivity Adj.
AF Base Tone Adj. Cycle Action
Performs one AF scanning cycle.
Feed in original
→
Reset scanner to HP
→
Shading
→
Move scanner to scan position
→
AF scanning and ejection
→
Reset scanner to HP
* Adjust speed to suit reproduction size in Test mode No. 785.
Performs AF feed operation.
* Adjust speed to suit reproduction size in Test mode No. 785.
Adjusts sensitivity of origin IN sensor.
Start: Shading
→
Moves to AF-ABC position (lamp ON at AF-ABC position)
Stop: Lamp goes OFF, and returns to home position.