Riso V8000 Series, Technical Manual

Page: 311 / 362

[17 - 12]
CHAPTER 17. TEST MODE
MASTER MAKING TEST MODE
No. 1/2 Switch
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Adjusts image elongation by varying the main pulse motor speed.
Loading Motor Overcurrent Detect
0 to 2000 (0 ms to 2000 ms)
10 (10 ms)
0 ms
295 Master Making Center Position Check
293
294
0 (Disabled)
1 (Enabled)
1 (Enabled)
-30 to +30 (-3.0 mm to +3.0 mm) relative to datum
* (+ moves to rear)
1 (0.1 mm)
0 mm
0 (prints all)
1 (does not print 2nd block)
0
O
Enables/Disables the loading motor over current detection.
Prevents printing of TPH second block. (Center of the main scanning direction
can be checked.)
O
Main Pulse Motor Speed For Master Making
(Old Master Making Unit Only)
TPH Horizontal Write Position Adjust
Adjusts the horizontal printing position of the TPH (main scanning direction).
750 to 850 (750 pps to 850 pps)
1 (1 pps)
795 pps
Data settings
W-Roller Temp. Reference Control
Enables/disables automatic image size adjustment for image elongation and
shrinkage caused by expansion and contraction of the write roller due to
temperature variations.
W-Roller Diameter Correction
Corrects variations in write roller diameter.
2345 to 2355 (23.45 mm to 23.55 mm)
1 (0.01 mm)
2350 (23.50 mm)
292
289
290
291 Loading Motor Rotation Stop Delay For Master Loading
Adjusts the time delay from the stop of the write pulse motor to the stop of the
loading motor when the master is loaded to the top clamp of the print drum.
0 (Disabled)
1 (Enabled)
1 (Enabled)