Riso V8000 Series, Technical Manual

Page: 304 / 362

[17 - 5]
CHAPTER 17. TEST MODE
SYSTEM/CNTRL PANEL TEST MODE
No.
070
071
072
073
074
078
No. 1/2 Switch
Description
Setting
Description
Setting
Description
Setting
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Maintenance-Copy Count Entry
Sets the number of main unit prints at which the maintenance call message is
displayed.
Maintenance-Drum Meter Entry O
Sets the number of print-drum prints at which the maintenance call message
is displayed for the drum currently installed. (Set for each print drum.)
Display details
Lists Test mode No. and setting for non-default
items during data setting.
Displays error code (D**-***) for set switch that
caused operation to stop. (Most recent 8 items)
Lists error codes for errors occurring recently in
normal mode. (Most recent 8 codes)
Maintenance Count
Current Battery Voltage
Optional Configuration Check
Resets test mode data settings and settings other than those for machine
codes, drum codes, and ink codes (user settings, administrator settings) to
default values.
* Always save data before resetting.
Displays all maintenance counter values. (Master,
printing, drum 1, drum 2)
Displays current battery capacity for ROSE and
MCTL as A/D value and voltage.
A/D value: 0 to 255 (full at 255)
Voltage: 0 to 3.3 V (displays x10 values)
Displays optional peripherals/devices currently
connected. Displays the version number if the
device contains ROM.
Data settings
Data check
System Parameter Adjust Record
SW Action Record
Error Record
081
082
083
None
Maintenance-Master Count Entry
Sets the number of masters at which the maintenance call message is
displayed.
None
Clear Test Mode Data Setup
Resets all settings set in normal test modes to default values.
* Cannot be selected from menu screen of the test mode.
* Always save data before resetting.
084
085
Clear Error Status Data
None
Forcibly clears the jam.
This test mode can also be used to clear error data for items for which T errors
can otherwise be cleared only by Technicians.
Consumable errors cannot be cleared.
This is the same mode with power ON pressing reset key.
Clear User Memory
0 to 9999 (*100)
1 (*100)
0
0 to 9999 (*1000)
1 (*1000)
0
0 to 9999 (*1000)
1 (*1000)
0
080