Riso V8000 Series, Technical Manual

Page: 331 / 362

[18 - 2]
CHAPTER 18. FUNCTIONS
Function Settings (Sub-Screen)
Function settings are made on the panel sub-screen.
To switch to the sub-screen from the main screen, press the “Main/Sub” button on the right-hand side of the screen.
1. Configuration
The function setting sub-screen contains the following items:
(1) Selections
(2) Memory
(3) Programs
(4) Other settings (Functions list/Properties)
1) Selections
(Jump to Users Guide)
Functions from the functions list in the “Other settings screen” that are frequently used can be assigned to
function buttons.
•
The functions available are listed in the functions list. Up to eight can be assigned to function buttons.
•
Functions are assigned on the “Catalog (Properties)” screen and can be separately set for P to P and D
to P modes.
•
Functions set in “Selections” for optional devices are automatically deleted if the particular optional
device is disconnected after assigning.
•
The default functions assigned in “Selections” when first shipped will vary by machine type.
•
The function buttons for “Continuous,” “Multi-up,” and “Repeat Master Making” can be displayed on the
main screen apart from “Selections.” (This information is displayed or not displayed, depending on
settings made on the “Properties” screen.)
2) Memory (Mode Memory)
(Jump to Users Guide)
This function stores the current master making and printing settings for the machine to be called up and
used again later.
•
Memory details are stored by pressing the “Confirm settings” key to open the Confirm settings screen.
•
Up to 24 settings can be stored. These can be assigned alphanumeric names.
•
Details are stored until they are deleted by the user, or until Test mode No. 081 “Clear User Memory” is run.
•
Functions that do not exist when invoked are ignored, such as when optional devices have been
disconnected.
•
The functions that can be stored in memory are as listed i n V8000 Users Guide . (The current status
is stored when the “Confirm settings” key is pressed.) If a function is to be stored after the printing has
started, the print quantity to be stored in the memory will be what is shown on the operation panel at that
moment.
3) Programs (Program Printing Memory)
(Jump to Users Guide)
This function stores program printing details for future use.
•
The memory details are stored and called up via the sub-screen memory screen.
•
Up to 12 single- or multi-original programs can be stored. These can be assigned alphanumeric
program names.
•
Programs are stored until they are deleted by the user, or when Test mode No. 081 “Clear User Memory” is run.
•
If both the mode memory and program print memory are both invoked, the number of prints is defined by
the program print memory settings, and not from the mode memory.
Refer to V8000 Users Guide for the
details on the contents of this Chapter.