Riso V8000 Series, Technical Manual

Page: 289 / 362

[16 - 26]
CHAPTER 16. PANEL MESSAGES
Errors involving consumables
DETAILED LIST OF PANEL MESSAGES
Error type C01 [Replace 1s t ink cartridge]
Panel display
C01-***
No Ink in Print Drum 1
Replace Ink Cartridge in Drum 1
Res et method Switch OFF 1s t ink cartridge set SW for 3 s.
Error point Error conditions
570 Ink sensor fails to go ON even when inking is performed for the pres et interval.
Error type C02 [Replace master roll]
Panel display
C02-***
No Master
Replace Master Roll
Res et method Mas ter making s et sensor: OFF
→
Master detection sensor: OFF
Error point Error conditions
271 Supply of mas ters ran out during mas ter feeding. (Master detection sensor OFF)
Error type C03 [1st mas ter dis posal box full]
Panel display
C03-***
Em pty Master Dis pos al Box 1
Res et method
1s t m as ter dis pos al box set sensor: OFF for 5 s
→
1st mas ter disposal box set s ens or: ON
→
1s t dis pos al box empty detection sensor: ON.
Error point Error conditions
341 Mas ter dis pos al count has reached the preset limit.
342
Dis pos al box empty detection sensor was ON during the resetting of the master disposal
box after C03.
343 Overload current detection during the m as ter compress ion action.
Error type C04 [No paper during FP]
Panel display
C04-***
Add Paper
Res et method Set paper
→
Recovery operation (m aster m aking continues ).
Error point Error conditions
490 Paper detection s ens or was OFF (before paper feeding).
Error type C05 [Replace 2nd ink cartridge]
Panel display
C05-***
No Ink in Print Drum 2
Replace Ink Cartridge in Drum 2
Res et method Switch OFF 2nd ink cartridge set SW for 3 s.
Error point Error conditions
570 Ink sensor fails to go ON even when inking is performed for the pres et interval.
Error type C06 [2nd master disposal box full]
Panel display
C06-***
Em pty Master Dis pos al Box 2
Res et method
2nd m as ter dis pos al box set sensor: OFF for 5 s
→
2nd master disposal box set s ens or: ON
→
2nd dis pos al box empty detection sensor: ON.
Error point Error conditions
341 Mas ter dis pos al count has reached the preset limit.
342
Dis pos al box empty detection sensor was ON during the resetting of the master disposal
box after C03.
343 Overload current detection during the m as ter compress ion action.