Riso V8000 Series, Technical Manual

Page: 310 / 362

[17 - 11]
CHAPTER 17. TEST MODE
MASTER MAKING TEST MODE
No. 1/2 Switch
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
1200 to 5300 (1200
Ω
to 5300
Ω
)
1 (1
Ω
)
1200
Ω
-40 to +40 (-4.0 mm to +4.0 mm)
* (+ increases margin)
1 (0.1 mm)
0 mm
Adjusts the master margin (mask amount in image processing) at the left
(rear) of the copy.
-40 to +40 (-4.0 mm to +4.0 mm)
* (+ increases margin)
1 (0.1 mm)
0 mm
O
O
O
-100 to +100 (-10.0 mm to +10.0 mm)
* (+ increases length)
1 (0.1 mm)
0 mm
-1000 to +1000 (-10.0 mm to +10.0 mm)
* (+ increases clamp range)
1 (0.01 mm)
0 mm
-1000 to +500 (-10.00 mm to +5.00 mm)
* (+ increases master length)
1 (0.01 mm)
-800 (-8.00 mm)
Master Cut Position Adjustment
Adjusts the length of one master (rear clamp amount).
O
O
288 TPH Resistance Value Entry
Sets the TPH resistance value.
Master Image Front Margin Adjust
Adjusts the master margin (mask amount in image processing) at the right
(front) of the copy.
281
282
Data settings
Master Clamp Range Adjustment
Adjusts the master clamp range when loading the master (distance from
master positioning sensor).
Adjusts the master-making start position (distance from master positioning
sensor ON to read/write signal ON).
-300 to +500 (-3.0 mm to +5.0 mm)
* (+ is downward)
1 (0.01 mm)
0 mm
Write Start Position Adjustment
Master-Making Length Adjustment
Adjusts the master-making area (adjusts master making signal ON time).
283
284
285
286
287 Master-Making Speed Adjustment
(New Master Making Unit Only)
Adjusts image elongation and shrinkage during master making by varying the
speed of the write pulse motor.
Master Image Rear Margin Adjust
-100 to +100
* (+ shrinks)
1 (0.125 mm)
0 mm