Riso V8000 Series, Technical Manual

Page: 287 / 362

[16 - 24]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Jam errors (A--:Displayed as list of G error)
Error type A07 [Paper feed error]
Error point Error conditions
436 First paper paper buckle jam.
437
First paper no ejection jam, but following paper jam med before s econd feed area.
Paper before the last no ejection jam, but last paper jam med before s econd feed area.
438 1s t paper s ens or was ON before start of printing.
439 Stripper m ultiple feed SW became ON.
Error type A08 [Paper jam on print drum ]
Error point Error conditions
466 Paper jam below the paper drum
467
First paper ejection jam , and following paper jam med before s econd feed area.
Paper before the last ejection jam, and last paper jam med before s econd feed area.
468
First paper ejection jam , and following paper jam med at first feed area.
Paper before the last ejection jam, and last paper jam med at first feed area..
469 1s t paper s ens or and paper ejection sensor were ON before s tart of printing.
470
First paper jam med under paper drum, but following paper ejected correctly.
Paper before the last jam med under paper drum, but last paper ejected correctly.
471
First paper ejection jam , and following paper jam med under paper drum.
Paper before the last ejection jam, but last paper ejected correctly.
Error type A09 [Paper ejection error]
Error point Error conditions
457 Paper ejection jam in last print.
458
First paper ejection jam , but following paper no jam ming before second feed area.
Paper before the last ejection jam, but last paper no jam ming before second feed area.
459
First paper ejection jam , but following paper no jam ming at firs t paper feed.
Paper before the last ejection jam, but last paper no jam ming at first paper feed.
460 Paper ejection sensor was ON before s tart of printing.
Error type A10 [AF original feed error]
Error point Error conditions
Error type A25 [Paper feed OUT error]
Error point Error conditions
446 First paper jam med in first paper feed area.
447
First paper ejection jam , and following paper jam med at first paper feed.
Paper before the last ejection jam, and last paper jam med at first paper feed.
448 2nd paper s ens or was ON before paper feed began.
slack jam : 1s t paper s ens or does not switch ON during paper drum angle 180-236 degrees.
paper feed jam : 2nd paper s ens or does not switch ON during paper drum angle 270-310 degrees.
Paper jam below the
paper drum:
paper ejection sens or does not s witch ON during paper drum angle 530-580 degrees.
Paper ejection jam: paper ejection sens or was ON at drum angle 840 degrees .
111
One of the following paper jams has occurred: paper remaining at resist sensor, paper
rem aining at read sensor, paper not reaching resist sensor, paper not reaching read
sensor, or paper not reaching AF paper ejection sensor.
Refer to below for the meaning of the four phrases as used on this page.