Riso V8000 Series, Technical Manual

Page: 303 / 362

[17 - 4]
CHAPTER 17. TEST MODE
SYSTEM/CNTRL PANEL TEST MODE
3. System/CNTRL Panel Test Mode
No. Sensors, switches
001 Wakeup Key
No. Motors, solenoids
030 Beep Sound Check 1
031 Beep Sound Check 2
032 Wakeup LED ON
No. Unit check 1/2 Switch
050 O
051 O
052 O
053 O
054 O
055 O
056
057
058
059
060
061
062
063
064 O
065
1) Touch two diagonally opposite
+
markings (top left & bottom right) on the
panel.
2) Touch three diagonally positioned
+
markings (top left, center, and bottom
right).
3) Confirm that square marks are all made right on the three diagonally
positioned
+
markings.
System Configuration Data Output
Creates a master for the CI system data on the print drum specified.
LCD Base Point Compensation
Perform the following adjustments in the order given.
Panel LED Test
Flashes all the panel LEDs.
Unit Initialization
Resets the mechanical sections to their home positions. (TPH pressure
release, pinch pressure release, print drum lock, clamp resetting, master
disposal unit)
Panel Key Test
Displays the panel key numbers on the 7-segment LED.
Panel LCD Test
Switches the LCD on and off.
Stepped Printing Operation
Prints at 15 rpm only while the “Test print” key is pressed. Printing stops as soon
as the key is released, resuming if the key is pressed once again. When the
“Stop” key is pressed, one more copy is printed before printing halts.
* At least one print drum must be inserted.
Auto Power-OFF Signal Output
Outputs the power-off signal.
* The “Speed” key is on.
* At least one print drum must be inserted.
Low-speed Printing
Prints continuously at 15 rpm.
* At least one print drum must be inserted.
Test Print F (Dot2 + Check)
Creates a master for test pattern 6 (dot 2 + check).
Paper Feed Test (Cycle)
Prints continuously.
Test Print D (Dot2)
Creates a master for test pattern 4 (dot 2).
Test Print E (Dot1 + Check)
Creates a master for test pattern 5 (dot 1 + check).
Test Print B (Check)
Creates a master for test pattern 2 (check).
Test Print C (Dot1)
Creates a master for test pattern 3 (dot 1).
0.5 second intervals
Illuminates
Test Print A
Creates a master for test pattern 1.
Detection status
Key pressed
Remarks
0.1 second intervals