Riso V8000 Series, Technical Manual

Page: 291 / 362

[16 - 28]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type D09 [Master making unit not set]
Panel display
D09-***
Close Master Making Unit
Res et method Mas ter making s et sensor: ON
Error point Error conditions
281 Mas ter making s et sensor was OFF.
Error type D10 [Scanner table not s et]
Panel display
D10-***
Close Scanner Table
Res et method Flat bed set SW: ON
Error point Error conditions
121 Flat bed set SW was OFF in standby m ode.
122 Flat bed set SW was OFF during operations .
Error type D11 [Front door not set]
Panel display
D11-***
Close Front Cover
Res et method Front door s afety SW: ON
Error point Error conditions
036 Front door s afety SW was OFF in standby m ode.
037 Front door s afety SW was OFF during operations.
Error type D13 [Paper ejection unit not set]
Panel display
D13-***
Close Paper Receiving Tray
Res et method Paper ejection unit safety SW: ON
Error point Error conditions
486 Paper ejection unit safety SW was OFF in standby m ode.
487 Paper ejection unit safety SW was OFF during operations .
Error type D16 [2nd print drum not s et]
Panel display
D16-***
Set Print Drum 2 in Place
Res et method
2nd print drum set sensor detects 2nd print drum . (2nd print drum set s ens or, the 2nd print
drum connection signal, and the 2nd print drum lock position s ens or all ON)
Error point Error conditions
573 The print drum specified by the print menu is not set.
Error type D17 [Incorrect 2nd print drum]
Panel display
D17-***
Wrong-Type Print Drum Ins talled for Drum 2
Res et method
Pull out 2nd print drum. (2nd print drum set s ens or OFF; 2nd print drum connection signal
OFF)
Error point Error conditions
576 Print drum code error
577 Print drum code error (error of ink cartridge PCB ID)
578 Print drum code error (error of size ID)